1. Inflatable set-up

• Roll out the inflatable
• Connect the blower
• Inflate the unit.

2. Prepare the JB Bubble Machine

• Fill the JB Bubble Machine with water (approx. 70 liters).
• Then add a package of JB Bubble Fluid . one package of JB Bubble Fluid is just enough for 1 JB Bubble Machine with approx. 70 liters of water.
• Stir well and move on to the next step. (Attention, first water in the JB Bubble Machine, then the fl uid. If you do this the other way around, the foam will already start to form in the JB Bubble Machine)

3. Attach the JB Bubble Machine to the inflatable

Is the JB Bubble Machine filled with water and the JB Bubble Fluid? Then put the lid on the JB Bubble Machine and connect the hose of the JB Bubble Machine to the hose of the inflatable.

4. Turn on the blower and play!

It is important that you first put the water in the barrel and then the entire package of the fluid. Stir the fluid gently into the water until it is completely dissolved. Then it is important to adjust the regulating belt properly so that the bubbles can develop as well as possible. If the foam head leaks, this is not a problem. The entire inflatable "leaks" air at the seams and if water gets to them, bubbles will appear.

Great! We like to think along with you. Our design team can design a personalized inflatable with the knowledge of the inflatable and the foam installation.

Like any soap concentrate, JB Bubble Fluid is harmful if you ingest large amounts. With normal use of the product, this is not an issue. As with regular soap, JB Bubble fluid can also cause stinging eyes. Dry the eyes with a towel or rinse with water. If users have sensitive skin, it is wise to avoid contact with the foam. After use, rinsing with water is recommended.

We recommend playing in the foam in bathing suits or old clothes. At a normal dose, the liquid will not affect clothing and any traces will always be washable.

Unfortunately, this is not possible. Regular soaps will provide no to only a little bubbles.

Bubbles products use a special lightweight PVC material, which is very tear-resistant. This allows you to easily set up your inflatable, and quickly clean and pack it after use.

If the water pump works but little foam comes out, this can have a number of causes. Watch this video to see how the pump is connected.

• Is the power supply for the water pump connected to 220 volts?
• Is there enough water and/or foam in the barrel?
• Does the water pump stand or float upright?
• Is there a kink in the water line?
• Does the nozzle spray straight into the foam net?
• Is the nozzle clean?

It could also be that the pump was pumping for a while with insufficient amount of water. After a while the pump will get too hot and stop because of the heat protection. After about 30 minutes it will start pumping again by itself. You do need to turn the pump off for a while to cool down.

It is wise to do so. If it is windy, not securing the unit can lead to dangerous situations. Make sure your inflatable is out of the wind. The foam is very light and is moved by the wind. Incidentally, this does not affect the grass.

The inflatables of JB Bubbles do not need a NEN-EN 14960 certificate, unless otherwise indicated. They do not fall under playground equipment or bouncy castles, because this is only a boarding/foam cannon.

We use - as with most other inflatables - a warranty period of 5 years. On the blower and Bubble pump there is a 2 year warranty. When the inflatable has suffered damage during use or transport, our service team is ready to help.

Buying a Bubble product from JB is just a great idea as it is sure to be a great addition to your assortment because it’s fun, innovative, very user friendly and very easy to clean. When you buy a Bubble Park, Shooter or Canon you also get a blower and JB fluid. This way you have the complete package and are ready to operate.